mercredi 25 mai 2016

Day 7

F holes :

 The F holes are first cut with a fret saw or jewellers saw and then finished with a carving knife and file if necessary in the round spots but it's a good idea to avoid filing it tends to round of the edge. 
 Rémi cuts his F holes perpendicular to the plate and not the arching, there is several different ways of doing it this is just the most common. Some people likes to taper then a little so that you don't see the edge as much when looking on the side. Not much to say it's just another long and hard work if you do them by hand !

 Positioning the F holes with a flexible plastic template :


The f holes sawn :

Trimming with a knife :


 

Aucun commentaire:

Enregistrer un commentaire